The advertising industry is an enduring industry. advertising industry cutting machine are more and more widely used throughout the industry. With the development of technology, customers have higher and higher requirements for cutting. In the traditional advertising industry, we only need to know the customers It is enough to provide him with a machine that can cut the thickness and size of the cutting, but the current customers are not only asking for cutting as simple as they are. They improve management by rearranging the process flow to reduce the subsequent labor, improve efficiency, and explode instant output.

Innovative thinking adopts new materials and new designs, especially the design and production of special-shaped products that are out of the tradition to attract high-profit large orders that were previously unacceptable. Therefore, we must provide customers with more cutting solutions, according to customer requirements. It is equipped with different tools and equipment, such as: UV equipment and AOYOO CNC cutting equipment, so that innovative design and production have more room for development.

AOYOO digital numerical control cutting system, supporting camera positioning, can achieve precise cutting regardless of sheet or coil, with high efficiency. Especially for the cutting of special shapes, the quality is higher than that of manual cutting, and the efficiency is increased by more than 4 times; the cutting efficiency of regular graphics is about 2 times higher than that of manual cutting.

What materials are mainly included in the advertising industry?

There are many materials in the advertising industry. Our common ones are: KT board, PP paper, car stickers, reflective materials, light box paper, stickers, inkjet cloth, cardboard, corrugated paper, honeycomb board, gray board paper, foam board, snow Stave board, acrylic, aluminum-plastic board, ABS board, MDF, PVC, plastic, etc.

Introduction of various materials in the advertising industry and corresponding cutting machine types:

KT board: Generally, the size of domestic KT board is 900x2400x5mm 1200x2400x5mm, and the density of kt board is between 140g-450. This size is generally used in advertising display boards. Generally, color spray painting is used to cover the KT board for cutting. Commonly used machine configurations are AOYOO1625, non-feeding, vibrating knife, small CCD and marking pen, and a few also use bevel cutting.

PP paper: generally used as display stands, roll-up banners, posters, photo paper, etc., generally used for printing with a photo machine, and then covered with a layer of cold laminating film to protect the picture, most of this material is in rolls, with a width specification There are 914, 1070, 1270, 1520mm and so on.

This material cutting machine is AOYOO1625. Generally, drag knives (or vibrating knives) and small CCDs are selected. The drag knives are non-vibrating cutting, which can perfectly cut materials with a height of 5mm, and can allow the fastest processing speed to cut materials. Compared with other cutting tools, it has the best cost performance and the lowest maintenance cost.

Light box paper: The light box is composed of light box paper, light box sheets, aluminum alloy profiles, etc. It is recommended to use AOYOO1625 vibrating knife or drag knife for cutting this kind of material.

Car sticker: A car sticker is a kind of advertising material. It is a special material for posters, pictures or texts and other advertisements mounted on cars, exterior walls or exterior glass. Its biggest advantage is that when the car body is pasted on the surface of the object, it is easy to replace in the future, it is easy to peel off, and it will not leave colloidal pollutants. Half cutter or vibrating knife is mostly used to cut this kind of material.

Reflective material: also known as retro-reflective material, retro-reflective material, widely used in traffic signs, markings, raised road signs, contour signs, traffic cones, anti-collision tubes and other road traffic safety facilities, as well as automobile number plates, clothing, shoes, hats, etc. Fire protection, railway, water transportation, mining areas, etc., can be divided into reflective materials for traffic signs, reflective materials for road markings, raised road signs, contour signs, reflective materials for clothing, and 3M adhesives. This material needs to use AOYOO1625 non-feeding vibrating knife (or drag knife), half cut and small CCD.

Inkjet cloth: commonly known as light box cloth, it is a kind of inkjet material that is produced by using PVC as raw material through a certain production process, and is mainly used for outdoor advertising inkjet printing. Generally, the width is 1m-3.2m, and the length is unlimited. It is recommended to use a feeding vibrating knife or a round knife for cutting, and the model is recommended according to the customer's material.

Self-adhesive: also called self-adhesive label material. It is a composite material with paper, film or special material as the fabric, adhesive coated on the back, and silicon-coated protective paper as the base paper. Generally, there are no prescribed specifications for self-adhesive labels. They are all determined by customers according to their own product specifications. The half-cutting knife is used for cutting stickers, the cutting speed is 600mm/s, and the blade life is 5 days.

PVC board, chevron board, foam board: pvc board and chevron board are one kind of things, and chevron board is also called PVC foam board. Use polyethylene as the main raw material, add foaming agent, flame retardant and anti-aging agent, and use special equipment to extrude. It is widely used in the industries of train car roof, box core layer, interior decoration board, building exterior wall board, interior decoration board, advertising sign, exhibition board, sign board, photo album board and so on. Product specifications: 1220*2440mm, 1560*3050mm, 2050*3050mm; product thickness: 1-33mm, it is recommended to use a milling cutter, you can add CCD.

Acrylic: Acrylic, also known as PMMA or plexiglass, is derived from English acrylic (acrylic plastic), and its chemical name is polymethyl methacrylate. Used in construction industry; advertising, transportation industry; medical industry use; household lighting, it is recommended to use AOYOO1625 non-feeding milling cutter for cutting, and CCD can be used to cut patterned materials below 6mm.

Aluminum-plastic composite panel: As a new type of decorative material, aluminum-plastic composite panel (also known as aluminum-plastic composite panel) has been introduced to China from Germany in the late 1980s and early 1990s. It is known for its economy and variety of colors. This material is quickly favored by people because of its flexibility, convenient construction method, excellent processing performance, excellent fire resistance and noble quality. The unique properties of this material determine its wide range of uses: Curtain wall panels, renovation and renovation of old buildings, interior wall and ceiling decoration, advertising signs, display stands, purification and dust prevention projects. It is recommended to use a milling cutter to cut aluminum-plastic panels below 4mm.

Medium-density fiberboard: It is made of plant fiber, applied urea-formaldehyde resin or other synthetic resin, and pressed under heating and pressure conditions to form a board with a density in the range of 0.50～0.88g/cm3. Other suitable additives can also be added to improve Sheet characteristics. It is recommended to use AOYOO1625 milling cutter for cutting, with a vacuum cleaner.

Textiles-banners: banners and flags, used to decorate colorful fabric signs that strengthen the characteristics and signals of buildings. The most used materials are vinyl laminate fabrics, vinyl-coated mesh fabrics, polyester fabrics, nylon fabrics, polyolefin spunbonded nonwoven fabrics, frameless films, dope dyed acrylic coated fabrics, canvas and twill fabrics. Choose fabrics for flags and banners, focusing on its durability, water repellency, color and appearance; when used indoors, it should also be flame-retardant. Mainly used in advertising display, flags, soft film, light boxes. Take 1625 as an example. Because the size of the flag or banner is larger than 2.5 meters, the big camera can only realize the edge-raising cutting of the table. At present, the small camera mark point and the feeding round knife can be used to cut. A mark point can realize the function of recognizing and cutting while feeding.

If you have anything else you want to know, you can leave a message in the background or send an email to us. If it is convenient, you can tell us the cutting material, shape and size, and we will recommend suitable models and cutting tools for you.